Shunyata Sigma XC V2 Powercord1.75 m. C15/C19
Shunyata Research’s new Reference Line power cords were developed using the same materials science and technologies that make the Omega the market’s ultimate cost-no-object power cord. The Reference Line power cables are designed to be used with the worlds finest audio components.There are three levels of performance in the Reference Line starting with the Delta v2 and models. The Alpha v2 is a level up from the Delta v2 and represents the best price-to-performance in the lineup. The Sigma v2 takes top honors in the line for those that must have the best. All three Reference models feature Shunyata Research’s exclusive VTX-Ag conductors that combine an ultra pure silver with a concentrically wound layer of OFE copper. This provides the speed and transparency of silver with the richness, tonal color and power of pure copper. Reference XC cables are designed specifically to optimize the performance of Shunyata Research power conditioners. The Sigma v2 XC cables eschew noise reduction features in favor of enhanced DTCD (dynamic transient current delivery). Using proprietary conductors and parts developed for the Omega XC, the Sigma v2 XC delivers pace-setting DTCD™ instantaneous current delivery, optimizing power conditioner and high-current amplifier performance.
The Sigma v2 XC is an ideal power cable for your Shunyata Research power conditioner while the Sigma v2 NR provides noise reduction to the source components.
The Sigma v2 NR provides great performance for all of the source equipment like CD players, DACs, tuners and preamplifiers.
Recommended Power Conditioners
Hydra Sigma S12, Denali 6000/S v2, Everest 8000
DTCD™ Analysis is a technique that measures instantaneous current through low impedance electrical conductors and contacts. Shunyata Research uses it to optimize the design, specification and construction of parts and materials to ensure maximum current delivery performance. Each part, conductor, noise circuit and material inside the Delta allows for maximum throughput of instantaneous current. Listeners will experience earth-shaking low-frequency performance from even the highest-current amplifiers as well as dynamic contrasts unheard of outside of a live event. More than any other design parameter, Shunyata Research’s skill at reducing impedance and improving dynamic instantaneous current is unparalleled.
CopperCONN™ Carbon Fiber
Shunyata Research has developed its own line of CopperCONN™ connects that feature true carbon fiber head-shells. The internal contacts are culled from solid OFE copper and feature a high-tension, spring-loaded contact for a vice-like grip. This contributes to a measurable improvement in DTCD™ performance and a correspondingly obvious difference in audible performance. CopperCONN™ connectors have a measurably lower contact-junction resistance and are hermetically sealed with an inert compound that protects the contacts and wires from corrosion. This also ensures that the wires cannot become loose, fray or pull out from the head shell. This guarantees a lifetime of reliable performance that does not degrade over time.
ArNi® wire was designed by Shunyata Research to be the finest quality wire available. It begins with the highest purity of copper and silver metals available, including Ohno (single crystal), PCOCC silver and OFE C0101 conductors. Fluorocarbon dielectrics, usually only found in aerospace applications that have exceptional electrical characteristics including extremely low dielectric absorption, high dielectric strength and superb heat resistance. When used in digital wiring it significantly reduces transient energy storage and release which affects phase noise performance. And finally every cable undergoes our proprietary KPIP™ process.
VTX-Ag cables are uniquely constructed with both an inner, center conductor made of pure silver and an outer concentric ring conductor made of pure copper. It is made using the finest fluorocarbon insulation to minimize dielectric absorption and re-radiation which translates to an improvement in resolution and clarity. VTX-Ag delivers the speed and clarity of silver and the midrange warmth and three dimensional power in the lower octaves of copper without imparting any of the negatives associated with either metal. The best qualities of silver and copper combined.
Shunyata Research uses only the highest purity of copper available for the production of its wire products. OFE Alloy 101 or C10100 is the highest grade of copper with a minimum 99.99% purity and a conductivity rating of 101% IACS. OFE stands for oxygen-free electrolytic and supersedes the term OFHC (oxygen-free high conductivity). C10100 is the only grade of copper that comes with a written certification of purity. Certified by ASTM F68 C10100.
Fluorocarbon dielectrics are usually only found in wire used in the aerospace industry, satellites and only the most expensive audiophile cabling. It has special electrical characteristics; very low dielectric absorption, high dielectric strength and exceptional heat resistance. When used in audio and power cables is reduces the perception of dynamic compression and it improves sonic low-level resolution and clarity. Crystal clear transient detail.
Simple crimping, soldering, brazing and screws are all inferior methods of joining two wires or terminals together. Sonic welding uses high-energy sonic waves to literally join two metals together at a molecular level and cold-welding uses high-energy pneumatic pressure to bond metals. Shunyata Research uses both methods to secure connections that do not degrade over time. Superior contact and wire connections.
Kinetic Phase Inversion Processing was developed by Caelin Gabriel after years of research into the underlying causes of various effects such as burn-in, wire directionality and the effects of cryogenic treatment. He discovered that there was an underlying core principle that burn-in and cryogenics only partially addressed. Once the governing principle was understood it became possible to create a processor that reduces the need for long burn-in periods and eliminates the effects of cryogenic treatment. Four-days of continuous KPIP™ processing dramatically reduces the sonic ups and downs associated with burn-in, delivering a relaxed and natural presentation.
- Cable Type: VTX-Ag 06
- Conductors: ArNi® / OFE
- Dielectric: fluorocarbon
- Connectors: CopperCONN™ Carbon-Fiber
- Noise Reduction: NA
- HARP Module: NA
- KPIP Processing: 4-days
- Standard Length: 1.75 meters
- Safety Assurance: Continuity and polarity tests – by two technicians
HiPOT tests insulation breakdown @ 4,500 VAC